Hydro Pneumatics


Go to content

Main menu:


Flow Control

Instrumentation > Indfos

SOLENOID VALVE TYPE EVJ / EVJD

Indfos Solenoid valves type EVJ/EVJD are normally closed type electromagnetic shut off valves which on receiving an electric impulse, open to allow flow in pipeline. These valves are designed for use with flourinated refrigerants and are equally suitable for mediums like air and water. However these valves are not suitable for industrial applications involving flow of oils and gases.

SOLENOID VALVE TYPE IMV / IMVD

Indfos Solenoid valves type IMV/IMVD are normally closed type electromagnetic shut off valves, which on receiving an electric impluse, open to allow flow in pipelines. These valves are designed for use with Air, Oil, Water, Town gas, Methane, Propane and other process medium compatiable with its diaphragm material which is viton, and body material which is brass.

HAND SHUT OFF VALVES TYPE BM

Indfos hand shut off valves types BM are diaphragm operated shut off valves, which stops flow in pipelines on light tightening of hand wheel. These valves are available in straightway patterns.

A unique triple diaphragm design ensures complete shut off when the wheel is tightened and the valves can operate under full vacuum down to 76 cm Hg

LIQUID LINE DRIERS TYPE DS / DM

Indfos liquid line driers are used for the dehydration of refrigerants circulating in refrigerating plants. Type DS is charged with silica gel whereas Type DM is charged with molecular sieves.

The drier is fitted in liquid lines of refrigeration plants between the receiver and expansion valve, with the flow in the direction of arrows. All driers can be fitted in any position.

Type DS driers can be regenerated by heating in dry air for 3 to 4 hours to a temperature of 140-160C. The regeneration is more effective if dry air is blown through the drier.

Home Page | Hydraulics | Pneumatics | Instrumentation | Valves | Contact | Photo Gallery | Site Map

Search this site

Back to content | Back to main menu